Category:1122 Glass Beads - Revision history

Smithk: Per CM, removed archaic SiteManager info and replaced with AASHTOWARE info

2021-09-17T13:04:55Z

Per CM, removed archaic SiteManager info and replaced with AASHTOWARE info

← Older revision		Revision as of 08:04, 17 September 2021
Line 46:		Line 46:

	===1122.4.1 Procedure===		===1122.4.1 Procedure===
	Record original test data and calculations, except for gradations, in Laboratory workbooks. Record the data and calculations for gradations through ~~SiteManager~~. Then, record test results through ~~SiteManager~~.		Record original test data and calculations, except for gradations, in Laboratory workbooks. Record the data and calculations for gradations through AASHTOWARE Project (AWP). Then, record test results through AWP.

	Determine percent irregularly shaped particles according to ASTM D1155.		Determine percent irregularly shaped particles according to ASTM D1155.
Line 65:		Line 65:

	===1122.4.2 Sample Record===		===1122.4.2 Sample Record===
	The sample record shall be completed in ~~SiteManager, as described~~ in [[:Category:101 Standard Forms#Sample Record General ~~Information~~\| Sample Record General ~~Information]] [[image:bulldozer.jpg\|20px~~]], and shall indicate acceptance, qualified acceptance, or rejection. Appropriate remarks, as described in [[106.20 Reporting\|EPG 106.20 Reporting]], are to be included in the remarks to clarify conditions of acceptance or rejection. Test results shall be reported on the appropriate templates under the Tests tab.		The sample record shall be completed in AASHTOWARE Project (AWP) in accordance with [[:Category:101 Standard Forms #Sample Record, General\|AWP MA Sample Record, General]], and shall indicate acceptance, qualified acceptance, or rejection. Appropriate remarks, as described in [[106.20 Reporting\|EPG 106.20 Reporting]], are to be included in the remarks to clarify conditions of acceptance or rejection. Test results shall be reported on the appropriate templates under the Tests tab.

Smithk at 14:29, 10 December 2018

2018-12-10T14:29:04Z

← Older revision		Revision as of 09:29, 10 December 2018
Line 64:		Line 64:
	Determine gradation in accordance with ASTM D1214.		Determine gradation in accordance with ASTM D1214.

	===1122.4.2 Sample Record===		===1122.4.2 Sample Record===
	The sample record shall be completed in SiteManager, as described in [[:Category:101 Standard Forms#Sample Record General Information\| Sample Record General Information]] [[image:bulldozer.jpg\|20px]], and shall indicate acceptance, qualified acceptance, or rejection. Appropriate remarks, as described in [[106.20 Reporting\|EPG 106.20 Reporting]], are to be included in the remarks to clarify conditions of acceptance or rejection. Test results shall be reported on the appropriate templates under the Tests tab.		The sample record shall be completed in SiteManager, as described in [[:Category:101 Standard Forms#Sample Record General Information\| Sample Record General Information]] [[image:bulldozer.jpg\|20px]], and shall indicate acceptance, qualified acceptance, or rejection. Appropriate remarks, as described in [[106.20 Reporting\|EPG 106.20 Reporting]], are to be included in the remarks to clarify conditions of acceptance or rejection. Test results shall be reported on the appropriate templates under the Tests tab.

Smithk: updated link

2018-10-16T13:21:05Z

updated link

← Older revision		Revision as of 08:21, 16 October 2018
Line 3:		Line 3:
	\|'''MGS Information'''		\|'''MGS Information'''
	\|-		\|-
	\|[~~http~~://www.modot.~~mo.gov/business/materials/pdf~~/mgs~~/MGSINDEX.pdf~~ Current General Services Specifications (MGS) By Subject]		\|[https://www.modot.org/general-services-specifications-mgs-subject Current General Services Specifications (MGS) By Subject]
	\|}		\|}

Smithk: updated link

2013-08-22T14:23:50Z

updated link

← Older revision		Revision as of 09:23, 22 August 2013
Line 39:		Line 39:
	==1122.3 Report==		==1122.3 Report==

	Glass beads sampled and submitted to the Laboratory will be reported in accordance with 1122.4 Laboratory Testing Guidelines.		Glass beads sampled and submitted to the Laboratory will be reported in accordance with EPG 1122.4 Laboratory Testing Guidelines.

	==1122.4 Laboratory Testing Guidelines==		==1122.4 Laboratory Testing Guidelines==
Line 65:		Line 65:

	===1122.4.2 Sample Record===		===1122.4.2 Sample Record===
	The sample record shall be completed in SiteManager, as described in [~~http~~:~~//contribute.modot.mo.gov/business/materials/pdf/vol_3/AS3510~~.~~pdf Automation Section 3510~~], and shall indicate acceptance, qualified acceptance, or rejection. Appropriate remarks, as described in [[106.20 Reporting\|EPG 106.20 Reporting]], are to be included in the remarks to clarify conditions of acceptance or rejection. Test results shall be reported on the appropriate templates under the Tests tab.		The sample record shall be completed in SiteManager, as described in [[:Category:101 Standard Forms#Sample Record General Information\| Sample Record General Information]] [[image:bulldozer.jpg\|20px]], and shall indicate acceptance, qualified acceptance, or rejection. Appropriate remarks, as described in [[106.20 Reporting\|EPG 106.20 Reporting]], are to be included in the remarks to clarify conditions of acceptance or rejection. Test results shall be reported on the appropriate templates under the Tests tab.

Smithk: /* 1122.4.2 Sample Record */ Per CM, updated link to AS 3510

2011-07-06T12:34:03Z

1122.4.2 Sample Record: Per CM, updated link to AS 3510

← Older revision		Revision as of 07:34, 6 July 2011
Line 65:		Line 65:

	===1122.4.2 Sample Record===		===1122.4.2 Sample Record===
	The sample record shall be completed in SiteManager, as described in [http://~~wwwi~~/~~intranet~~/cm/~~materials~~/vol_3/AS3510.pdf Automation Section 3510], and shall indicate acceptance, qualified acceptance, or rejection. Appropriate remarks, as described in [[106.20 Reporting\|EPG 106.20 Reporting]], are to be included in the remarks to clarify conditions of acceptance or rejection. Test results shall be reported on the appropriate templates under the Tests tab.		The sample record shall be completed in SiteManager, as described in [http://contribute.modot.mo.gov/business/materials/pdf/vol_3/AS3510.pdf Automation Section 3510], and shall indicate acceptance, qualified acceptance, or rejection. Appropriate remarks, as described in [[106.20 Reporting\|EPG 106.20 Reporting]], are to be included in the remarks to clarify conditions of acceptance or rejection. Test results shall be reported on the appropriate templates under the Tests tab.

Smithk: /* 1122.4.2 Sample Record */ updated link

2010-07-01T18:18:25Z

1122.4.2 Sample Record: updated link

← Older revision		Revision as of 13:18, 1 July 2010
Line 65:		Line 65:

	===1122.4.2 Sample Record===		===1122.4.2 Sample Record===
	The sample record shall be completed in SiteManager, as described in [http://wwwi/intranet/cm/materials/vol_3/AS3510.pdf Automation Section 3510], and shall indicate acceptance, qualified acceptance, or rejection. Appropriate remarks, as described in [[106.9 Reporting ~~Test Results~~\|EPG 106.9 Reporting ~~Test Results~~]], are to be included in the remarks to clarify conditions of acceptance or rejection. Test results shall be reported on the appropriate templates under the Tests tab.		The sample record shall be completed in SiteManager, as described in [http://wwwi/intranet/cm/materials/vol_3/AS3510.pdf Automation Section 3510], and shall indicate acceptance, qualified acceptance, or rejection. Appropriate remarks, as described in [[106.20 Reporting\|EPG 106.20 Reporting]], are to be included in the remarks to clarify conditions of acceptance or rejection. Test results shall be reported on the appropriate templates under the Tests tab.

Smithk: updated links

2010-07-01T17:13:58Z

updated links

← Older revision		Revision as of 12:13, 1 July 2010
Line 6:		Line 6:
	\|}		\|}

	This article establishes procedures for inspecting, sampling and reporting glass beads.		This article establishes procedures for inspecting, [[106.3 Samples, Tests and Cited Specifications#106.3.1 Sampling\|sampling]] and reporting glass beads.

	==1122.1 Apparatus==		==1122.1 Apparatus==
Line 31:		Line 31:
	As the samples from the containers are obtained and combined, identify each can with the inspector's identification number and consecutive letters of the alphabet, i.e., 83MA7890A, 83MA7890B, 83MA7890C, etc. Mark the container from which each sample is taken with that sample's identification number for future reference.		As the samples from the containers are obtained and combined, identify each can with the inspector's identification number and consecutive letters of the alphabet, i.e., 83MA7890A, 83MA7890B, 83MA7890C, etc. Mark the container from which each sample is taken with that sample's identification number for future reference.

	Submit the group of samples representing a shipment to the Laboratory, as directed in [[106.~~5 Sampling~~#106.5.2 Submission of Laboratory Samples\|EPG 106.5.2 Submission of Laboratory Samples]]. Include a copy of the required certification.		Submit the group of samples representing a shipment to the Laboratory, as directed in [[106.3 Samples, Tests and Cited Specifications#106.3.1.2 Submission of Laboratory Samples\|EPG 106.3.1.2 Submission of Laboratory Samples]]. Include a copy of the required certification.

	When resamples of a shipment are required, obtain them from containers not previously sampled. Use a new identification number for resamples. Include a notification in the sample record, i.e., "This is a resample of the material previously submitted under Identification Number 83MA7890A through E."		When resamples of a shipment are required, obtain them from containers not previously sampled. Use a new identification number for resamples. Include a notification in the sample record, i.e., "This is a resample of the material previously submitted under Identification Number 83MA7890A through E."

Smithk: minor clarifications to differentiate EPG articles (that are referenced as "articles", not "sections") from specifications (that are referenced as "sections")

2010-03-31T13:47:37Z

minor clarifications to differentiate EPG articles (that are referenced as "articles", not "sections") from specifications (that are referenced as "sections")

← Older revision		Revision as of 08:47, 31 March 2010
Line 31:		Line 31:
	As the samples from the containers are obtained and combined, identify each can with the inspector's identification number and consecutive letters of the alphabet, i.e., 83MA7890A, 83MA7890B, 83MA7890C, etc. Mark the container from which each sample is taken with that sample's identification number for future reference.		As the samples from the containers are obtained and combined, identify each can with the inspector's identification number and consecutive letters of the alphabet, i.e., 83MA7890A, 83MA7890B, 83MA7890C, etc. Mark the container from which each sample is taken with that sample's identification number for future reference.

	Submit the group of samples representing a shipment to the Laboratory, as directed in [[106.5 Sampling#106.5.2 Submission of Laboratory Samples\|106.5.2 Submission of Laboratory Samples]]. Include a copy of the required certification.		Submit the group of samples representing a shipment to the Laboratory, as directed in [[106.5 Sampling#106.5.2 Submission of Laboratory Samples\|EPG 106.5.2 Submission of Laboratory Samples]]. Include a copy of the required certification.

	When resamples of a shipment are required, obtain them from containers not previously sampled. Use a new identification number for resamples. Include a notification in the sample record, i.e., "This is a resample of the material previously submitted under Identification Number 83MA7890A through E."		When resamples of a shipment are required, obtain them from containers not previously sampled. Use a new identification number for resamples. Include a notification in the sample record, i.e., "This is a resample of the material previously submitted under Identification Number 83MA7890A through E."
Line 65:		Line 65:

	===1122.4.2 Sample Record===		===1122.4.2 Sample Record===
	The sample record shall be completed in SiteManager, as described in [http://wwwi/intranet/cm/materials/vol_3/AS3510.pdf Automation Section 3510], and shall indicate acceptance, qualified acceptance, or rejection. Appropriate remarks, as described in [[106.9 Reporting Test Results\| 106.9 Reporting Test Results]], are to be included in the remarks to clarify conditions of acceptance or rejection. Test results shall be reported on the appropriate templates under the Tests tab.		The sample record shall be completed in SiteManager, as described in [http://wwwi/intranet/cm/materials/vol_3/AS3510.pdf Automation Section 3510], and shall indicate acceptance, qualified acceptance, or rejection. Appropriate remarks, as described in [[106.9 Reporting Test Results\|EPG 106.9 Reporting Test Results]], are to be included in the remarks to clarify conditions of acceptance or rejection. Test results shall be reported on the appropriate templates under the Tests tab.

Smithk: /* 1122.3 Report */ Updated text refering to Form T 634 (that no longer exists)

2008-12-08T14:55:24Z

1122.3 Report: Updated text refering to Form T 634 (that no longer exists)

← Older revision		Revision as of 09:55, 8 December 2008
Line 40:		Line 40:

	Glass beads sampled and submitted to the Laboratory will be reported in accordance with 1122.4 Laboratory Testing Guidelines.		Glass beads sampled and submitted to the Laboratory will be reported in accordance with 1122.4 Laboratory Testing Guidelines.

	Report glass beads accepted by certification on [[Form T-634]]. Attach a copy of the certification to the report. Include appropriate remarks, as described in [[106.9 Reporting Test Results#106.9.1 Determination of Significant Digits\|The Rounding Off Method]], in the report to clarify conditions of acceptance or rejection. All shipments are to be reported either by the Laboratory or the field.

	==1122.4 Laboratory Testing Guidelines==		==1122.4 Laboratory Testing Guidelines==

Smithk: /* 1122.2.2 Sampling */ Updated text refering to Form T 617 (that no longer exists)

2008-12-08T14:54:25Z

1122.2.2 Sampling: Updated text refering to Form T 617 (that no longer exists)

← Older revision		Revision as of 09:54, 8 December 2008
Line 29:		Line 29:
	(d) The volume of each of the five samples taken from the container should be approximately equal and, when combined, should be of sufficient volume to fill the one-quart (1 liter) friction top can at least half full. Should the quart (liter) can be less than half-full after obtaining 5 samples, take additional thief samples at random locations until the half-full requirement has been met.		(d) The volume of each of the five samples taken from the container should be approximately equal and, when combined, should be of sufficient volume to fill the one-quart (1 liter) friction top can at least half full. Should the quart (liter) can be less than half-full after obtaining 5 samples, take additional thief samples at random locations until the half-full requirement has been met.

	As the samples from the containers are obtained and combined, identify each can with the inspector's identification number and consecutive letters of the alphabet, i.e., ~~AP88-28A~~, ~~AP88-28B~~, ~~AP88-28C~~, etc. Mark the container from which each sample is taken with that sample's identification number for future reference.		As the samples from the containers are obtained and combined, identify each can with the inspector's identification number and consecutive letters of the alphabet, i.e., 83MA7890A, 83MA7890B, 83MA7890C, etc. Mark the container from which each sample is taken with that sample's identification number for future reference.

	Submit the group of samples representing a shipment to the Laboratory, ~~accompanied by~~ [[~~Identification Form T-617~~]]. Include, on the form, all pertinent information necessary to the sample, such as: manufacturer's name and address, source, purchase order number, lot number, type of beads, quantity in pounds (kg) and inspector's name and identification number. Attach a copy of the required certification.		Submit the group of samples representing a shipment to the Laboratory, as directed in [[106.5 Sampling#106.5.2 Submission of Laboratory Samples\|106.5.2 Submission of Laboratory Samples]]. Include a copy of the required certification.

	When resamples of a shipment are required, obtain them from containers not previously sampled. Use a new identification number for resamples. Include a notification on the ~~identification sheet~~, i.e., "This is a resample of the material previously submitted under Identification Number ~~AP88-28A~~ through E."		When resamples of a shipment are required, obtain them from containers not previously sampled. Use a new identification number for resamples. Include a notification in the sample record, i.e., "This is a resample of the material previously submitted under Identification Number 83MA7890A through E."

	If random samples indicate that the material does not comply with specifications, acceptance by certification may be withdrawn, the district notified, and each lot from that manufacturer will be sampled and tested.		If random samples indicate that the material does not comply with specifications, acceptance by certification may be withdrawn, the district notified, and each lot from that manufacturer will be sampled and tested.